FG-80/4'' double-chambered horizontal gravel filter
The gravel horizontal filter is meant exclusively to pre-filtrate drip
irrigation water of mechanical impurities and microweeds while withdrawing
water from surface sources.
/fg802.jpg)
Technical data for the FG-80 sand gravel filter
Nominal flow
rate, m3/h
|
80 |
Recommended flow rate, m3/h
|
60-96 |
Filter surface area, m2
|
1.28 |
Working pressure (no more than),
kilogauss/cm2
|
8.00 |
Pressure loss for filter demanding
washing, kilogauss/cm2
|
0.5-0.8 |
Gravel fraction, mm
|
1-2 |
Demanded amount of gravel, kg
|
600 |
Diameter of the collector, mm/inches
|
|
Input (flange)
|
100/4 |
Output (screw thread)
|
100/4 |
Overall dimensions, mm
|
|
Length
|
2080 |
Width
|
840 |
Height
|
1590 |
Weight, kg (without gravel)
|
260 |
The FG-80 filter's functional concept
The filter's functional concept is based on transporting the contaminated
water through the layer of calibrated sand. The contaminants will be trapped on
the surface of the sand, and the treated water will come to the final
filtration. When the filter is clogged, it has to be washed by the reversed
water flow. Filter sections will be washed in turn. During that, every new
section will be washed by water that has already been filtered by the previous
sections. Each section can function individually or simultaneously with others,
so the filter washing mode may be active during irrigating.
|
/fg-80.jpg)
