FS 24/3'' filter station
The filter station is meant for implementation of the full cycle of water
treatment at drip irrigation while withdrawing water from surface sources
(channels, rivers, lakes).
Structure
It consists of two FG-12/2'' gravel filters, two disk filters (discharge
capacity up to 12 m3/h) and a fertilizing device, implemented like a
standard fertilizing unit with an injector, or the equipment implemented like a
fertilizing vessel. Its efficiency is up to 24 m3/h or 1 hectare of
simultaneous watering. Used for irrigation of area up to 6 hectares.
Technical data for the filter station
| Nominal flow rate,
m3/h |
24 |
| Recommended flow rate, m3/h |
18-30 |
| Filter surface area, m2 |
0.2 |
| Working pressure (no more than),
kilogauss/cm2 |
8 |
| Pressure loss for filter demanding washing,
kilogauss/cm2 |
0.5-0.8 |
| Gravel fraction, mm |
1-2 |
| Demanded amount of gravel, kg |
200 |
| Diameter of the collector |
|
| Input (flange), mm |
75 |
| Output (screw thread), inches |
3" |
| Overall dimensions, mm |
|
| Length |
2000 |
| Width |
1500 |
| Height |
900 |
| Weight, kg (without gravel) |
100 |
|
