FS-6/1.5'' filter station
The filter station is meant for implementation of the full cycle of water
treatment at drip irrigation while withdrawing water from surface sources
(channels, rivers, lakes).
Structure
It consists of the FG-6/1.5'' filter, a disk filter (discharge capacity up
to 6 m3/h) and a fertilizing device, implemented like a standard
fertilizing unit with an injector, or the equipment implemented like screw
terminal with tap for connecting to an outer boost pump (or a sprayer).
Technical data for the filter station
| Nominal flow rate,
m3/h |
6 |
| Recommended flow rate, m3/h |
5-8 |
| Filter surface area, m2 |
0.1 |
| Working pressure (no more than),
kilogauss/cm2 |
8 |
| Pressure loss for filter demanding washing,
kilogauss/cm2 |
0.5-0.8 |
| Gravel fraction, mm |
1-2 |
| Demanded amount of gravel, kg |
50 |
| Diameter of the collector |
|
| Input (flange), mm |
50 |
| Output (screw thread), inches |
1.5" |
| Overall dimensions, mm |
|
| Length |
2000 |
| Width |
700 |
| Height |
900 |
| Weight, kg (without gravel) |
37 |
|
